Shop
Showing 9511–9525 of 9711 results
-
Uncategorized
Xbee USB Adapter Base FT232RL
Specification:- IC chip: FT232RL
- 3.3V and 5V dual power output
- 3.3V and 5V IO compatible
- USB 2.0 protocol
- BitBang mode ready
- Easily connected to a PC via mini-USB cable
- XBee-setting support software X-CTU
- Communication Protocol: UART, Bit Bang I/O, SPI
- USB Interface: Mini-B (2.54mm pitch pin header)
Actual product may be different than shown image.
SKU: RDNA-B340.1 -
Uncategorized
XBee USB Adapter FT232RL for Arduino with Cable
Specifications:- IC chip: FT232RL
- 3.3V and 5V dual power output
- 3.3V and 5V IO compatible
- USB 2.0 protocol
- BitBang mode ready
- Easily connected to a PC via mini USB cable
- XBee-setting support software X-CTU
- Communication Protocol: UART, Bit Bang I/O, SPI
- USB Interface: Mini-B (2.54mm pitch pin header)
SKU: RDNA-C344.1 -
Uncategorized
Xbee Zigbee Module S2c 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
Specifications:
- Integrated, Wire Antenna
- Inter-operable with other ZigBee-compliant devices
- Programmable versions with on-board microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Through-hole form factor enables flexible design
- Out-of-the-box RF communications, no configuration needed
SKU: RDNA-100.2 -
Uncategorized
XD-21 LM358 Gain Amplification Module Operational Amplifier Module
Specifications:
- On-board LM358 chip
- Adjustable gain up to 100x
- On-board 10K adjustable resistor for gain adjustment
- On-board power indicator
- Chip has been drawn out to the main pins for direct input and output of signals
- Working Voltage Range: 5 V to 12 V
- Board Size: 32.7 x 13.3 mm
SKU: RDNA-B346.2 -
Uncategorized
XD-42 5V/3.3V Dual Channel Solderless Breadboard Power Supply Module
Specification:
- Locking On/Off Switch
- Green LED Power Indicator
- Voltage Swapping Switch on both rail Channel
- Its concave design will not waste your proto zone.
- Easy to install on a breadboard with Compact portable size
SKU: RDNA-A148 -
Uncategorized
XF-25 Ultra Mini Multi-color Block Building breadboard
Specifications:
- 1 Terminal Strip, Tie-point 25
- ABS plastic Material and Good Contact points
- Completely Reusable flexible Structure
- Colorful Blocks
- Accepts a variety of wire sizes (29-20 AWG)
- 32 modular mini breadboard is pluggable in one piece of plate
SKU: RDNA-B660.3 -
Uncategorized
XGZP168 0 to 700kPa CF Pressure Sensor
Specifications:
- Model No:- XGZP168
- Manufacturer : CFSensor
- Range:0 to 700kPa
- Operating Voltage: ≤15mV or ≤3mA
- Temp. Compensated: -30℃～+125℃(-22℉～+257℉)
- Product Category : Pressure Sensor
- Operating Temp : -30~120°C
- Output : mV(millivolt)
SKU: RDNA-357.16 -
Uncategorized
XGZP191 0 to 10 KPa Pressure sensor (mA Output)
Specifications:
- Range: 0～10kPa
- MEMS technology, Solid-state reliability
- Barb inlet pipe
- Calibrated mV output
- Temperature compensated
- Working temp.: -30℃～+125℃(-22℉～+257℉)
- Gage pressure type(Positive & Negative Pressure)
- Easy to use and embed in OEM equipment
SKU: RDNA-C86.1 -
Uncategorized
XGZP191 0 to 100 KPa Pressure sensor (mA Output)
Specifications:
- Range: 0～100kPa
- MEMS technology, Solid-state reliability
- Barb inlet pipe
- Calibrated mV output
- Temperature compensated
- Working temp.: -30℃～+125℃(-22℉～+257℉)
- Gage pressure type(Positive & Negative Pressure)
- Easy to use and embed in OEM equipment
SKU: RDNA-363.8 -
Uncategorized
XGZP191 0 to 200 KPa Pressure sensor (mV Output)
Specifications:
- Range: 0～200kPa
- MEMS technology, Solid-state reliability
- Barb inlet pipe
- Calibrated mV output
- Temperature compensated
- Working temp.: -30℃～+125℃(-22℉～+257℉)
- Gage pressure type(Positive & Negative Pressure)
- Easy to use and embed in OEM equipment
SKU: RDNA-363.9 -
Uncategorized
XGZP191 0 to 50 KPa Pressure sensor (mA Output)
Specifications:
- Range: 0～50kPa
- MEMS technology, Solid-state reliability
- Barb inlet pipe
- Calibrated mV output
- Temperature compensated
- Working temp.: -30℃～+125℃(-22℉～+257℉)
- Gage pressure type(Positive & Negative Pressure)
- Easy to use and embed in OEM equipment
SKU: RDNA-363.7 -
Uncategorized
XGZP6819D 0 to 10 KPa Digital IIC – CF SENSOR ORIGINAL
Specifications:
- Ranges: 0 kPa – 10 kPa
- 1.8V～5.5V power supply for IIC interface
- Current consumption : <5uA(one time measurement)
- Static Current: <100nA (25°C)
- Temp. Compensated: 0°C~60℃
- Temperature Accuracy: ±0.5°C@25℃
- Gage Type
- For Non-corrosive gas or air
SKU: RDNA-E45.1 -
Uncategorized
XGZP6847A -1 to 1KPa Analog Output 5V – CF SENSOR ORIGINAL
Specifications:
- Model No:- XGZP6847A
- Range: – 1 to 1 kPa
- Operating Voltage: 5V
- Output: 0.5V to 4.5V
- For Non-corrosive Gas or Air
- Calibrated, I2C Signal output
- Temp. Compensated: 0℃～+60℃(32℉～+140℉)
- Low Cost for high volume application
SKU: RDNA-E330.2 -
-
